You Don’t Need a Big Truck to Make a Big Impact
The new WESTERN® IMPACT™ UTV V-plow is a professional-grade snow plow designed to help you get the most out of your utility vehicle this winter. Built with the same high quality as all of our plows, this tough, compact plow easily adjusts to pass through gates and clear 5′ sidewalks. Suited for a wide variety of models, the IMPACT UTV V-plow allows you to get your winter work done faster.
The 6′ powder coated steel flared moldboard comes with a standard 5″ steel cutting edge for a clean scrape and extended wear. For maximum versatility, the plow quickly configures from straight, to scoop, to V position, with an effective plowing width of 5′ or less, to fit most sidewalks, and through gate openings.
Constructed with high-strength, low-weight alloy steel components that are both stronger and lighter than traditional steel, so your utility vehicle can work hard without having to carry the extra weight on your UTV frame as with heavier plows. The IMPACT™ UTV V-plow blade is reinforced with six vertical ribs, and features our proven T-frame design.
Like all WESTERN® V-plows, the IMPACT™ UTV V-plow features independent trip-edge protection to get over bumps and obstacles whether in V, scoop, or straight-blade configuration, helping to protect the plow, the utility vehicle, and the operator. Since only the bottom edge trips, the blade stays upright and plowed snow remains in front of the blade, so you can keep on going without dumping the entire load of snow.
Double-acting cylinders allow you to operate each wing independently, or set the wings for straight blade operation so you can angle the entire blade left and right. They also use hydraulic pressure to hold the wings firmly in place for clean back dragging, unlike spring-loaded systems, which can collapse under pressure.
The “scrape lock” feature automatically locks the blade down to keep it from floating over snow, for an even cleaner scrape.
At Western Products, we build our own hydraulics for unmatched speed and durability. All critical components are fully enclosed for protection from the elements.
For UTVs with a wider wheel base, a width adjustment setting is available to make your plowing path wider. Using the alternate setting, the plowing width is 5′ 6″ at full V and full angle, and 5′ 1″ in full scoop.
Designed specifically for UTVs, this hand-held control allows the blade to be raised, lowered, angled or retracted with the push of a button. A joystick control is also available for easy blade control operation when wearing gloves.
Attaching the IMPACT™ UTV V-plow is simple.With the receiver brackets installed on your utility vehicle, either drive in or manually push the plow into the receivers. Release the hitch pin handle, plug in the electrical and activate FLOAT on the control. Push up on the lift frame to allow hitch pins to fully engage the hitch pin holes. Verify the lock pin is engaged in the forward hole in the lock pin bracket.
The removable receivers and low profile undercarriage provide exceptional ground clearance and maximize the ramp angle, so your unit will be trail ready when the plow is not attached.
The ULTRAFINISH™ powder coat provides outstanding protection against wear and rust.
- Eight-wheel shot blaster pre-treatment removes mill scale and abrades surfaces for optimum adhesion
- Multi-stage pre-wash provides superior surface preparation
- Epoxy primer is applied to enhance powder adhesion
- Robotic guns deliver precise, consistent powder coat coverage
- Final baking process provides a long-lasting hard-as-nails WESTERN® red, that’s become synonymous with quality
Have questions about which Western Snowplow is best for you?